Turning Tool Form

Home Up

Turning Tool Form Bore Tool Form Drill Tool Form Milling Tool Form

In order for us to quote your tool we need some information from you. This helps us figure parameters for which to work within. We will require two basic forms of information:

  1. Part information

  2. Machine conditions

Please Fax or E-mail a section of your part print that is applicable. Mark the section & dimensions to be machined. If there are work holding devices or fixturing near the area to be machined please include these (with dimensions) in your print.

Also, be sure to have identification included on Fax drawing (Name, Part ID). 

Fax: (719) 539-3534

 

You may submit the following information online or print it and fax or mail it with your part print section.

Please fill out as much information as possible.
(This information is confidential!)

Lines marked with "*" must be completed!

Turning Tool Form
bulletGeneral Information:
*Company Name:
*Contact Person:
Address:
City:
State:
Zip Code:
*Phone:
Fax:
E-Mail:

 

General Comments:

bulletCustom Tool Section:
*Select Type of Tool Needed:
Your Insert Preference (ie.TPG-322):

Tool Comments:

 

bulletPart Section:
*Type of Material:
*Material Hardness:
Will Fax Print:
Do you foresee any fixture or work holding problems?

Part & Fixture Comments:

 

Please fill out section that applies

bulletMilling Machine Condition Section:
Type of Machine:
Type of Mill:
*What is the Spindle?:
*Spindle Size:
*Condition of Spindle:
Make of Machine:
Model:
Spindle HP:
Axis HP:
bulletTurning Machine Condition:
Type of Machine:
*Condition of Machine:
Make of Machine:
Model:
Rated HP:

Machine Comments:

 

Last Update: 05/09/03